Product range

Lhoist supplies tailor-made blends based on the amount of each micropollutant (and possibly acidic gases) in the flue gas to be treated, as well as the process conditions. 

Our market-leading hydrated lime products Sorbacal^® SP and SPS can in particular be blended with high quality additives such as activated carbon, lignite coke and mineral sorbents. Such a blend enables both acid-gas pollutants and micropollutants to be captured with one sorbent in a single DSI system. In addition, blending with a calcium sorbent mitigates the risk that the activated carbon powder will combust or explode.

Blends can be tailored to your plant operation specifications.

Sorbacal^® SL is a ready-to-use milk of lime product (also called lime slurry or lime milk) used for semi-dry/wet or spray dry absorber processes, as well as small wet FGT units.

Sorbacal^® SL is composed of 5-50% of Ca(OH)₂ suspended in water. The quality and reactivity of milk of lime depend on the characteristics of the lime and water quality (chemical composition, temperature, particle size), as well as the slaking conditions.

Ready for use, Sorbacal^® SL reduces the uncertainty and operational complexity of on-site slaking. The carefully controlled manufacturing conditions ensure constant high quality.

Sorbacal^® Q quicklime, or calcium oxide (CaO), is widely used in a large variety of flue gas desulfurization (FGD) processes. The milled product is supplied in different particle-size distributions (PSD) varying from pebble to very fine powder (0-90 µm), with a minimum of typically 92% available CaO as measured with the EN 459 method.

Sorbacal^® Q is used to produce milk of lime and hydrated lime for spray dryer absorber (SDA), circulating dry scrubber (CDS) and wet FGD systems. The quality and reactivity of milk of lime depend on the characteristics of the lime and water quality (chemical composition, temperature, particle size), as well as the slaking conditions.

Sorbacal^® Q enables milk of lime preparation with a fine particle size, making it more reactive than standard quicklimes.

Sorbacal^® CDS is an innovative sorbent developed specifically for circulating dry scrubber systems. It has been specifically formulated to have better flowability and is able to handle more than double the water content compared to standard hydrates. This unique feature of enabling operation at increased residue water content leads to a diverse range of benefits in CDS systems.

Ideally suited for all circulating dry scrubber designs and industrial processes.

Sorbacal SP ^® is an enhanced hydrated lime especially designed for DSI applications. Its specific surface area of typically 40 m²/g (BET) is two times higher than standard hydrated lime, and its porous volume is typically 0.20 cm³/g (BJH), compared to 0.08 cm³/g for standard hydrated lime. These qualities make the material significantly more effective for acid gas removal than standard hydrates. The particle size of Sorbacal^® SP is designed for optimal reactivity, flowability and handling.

A flagship product with a long history of industrial application, Sorbacal^® SP is a dry, white, ready-to-use powder. Therefore, no milling or preparation is required before injection. It is ideally suited for all kinds of industrial processes, including incinerators and biomass-fueled power plants, as well as a growing number of new FGT applications in the cement and glass industries.

Sorbacal^® H is a hydrated lime or calcium hydroxide (Ca(OH)₂) of high quality for emission control applications. Compared to standard hydrates, it has a higher specific surface area of typically 15-22 m²/g (BET), as well as a porous volume of typically 0.08 cm³/g (BJH). Both enhance acid gas capture.

A white, dry, ready-to-use powder, Sorbacal^® H is used directly in dry processes, as well as for producing lime slurry (milk of lime) for semi-wet processes.

Sorbacal^® SPS is an activated enhanced hydrated lime with the highest acid gas removal performances. It was developed especially for removing acid gas pollutants using dry or combined processes. Sorbacal^® SPS has a specific surface area of typically 40 m²/g (BET) and a porous volume of typically 0.20 cm³/g (BJH). The particle size of Sorbacal^® SPS is designed for optimal reactivity, flowability and handling.

This dry, white, ready-to-use powder meets high SO₂ removal demands. Sorbacal^® SPS has the same physical and chemical characteristics as Sorbacal^® SP, but is activated at the time of production to improve performance. Also, like Sorbacal^® SP, it does not require prior milling and is applicable for a very wide temperature range between 50-900 °C. Sorbacal^® SPS has an improved electrical resistivity making it compatible with electrostatic precipitators.